OMC-160-3 Manual Page 6
2 Safety
For correct functioning the Observator OMC-160 Anemometer
must be installed and commissioned according installation &
commissioning instructions by a qualified engineer.
The Observator OMC-160 Anemometer has moving parts, which
can rotate fast during strong winds.
Keep clear of the cup and vane during strong winds!
The Observator OMC-160 Anemometer is usually installed at
height.
Technicians maintaining the system need to be qualified to work
at those heights whenever applicable!
Remember: instruments are tools.
They do NOT replace your own observations!
After end of life dispose this product according local regulations
or return to manufacturer.
To Next Page
Loading...