OMC-160-3 Manual Page 8
3.6 Field use examples
4 Installation
4.1 Unpacking
The scope of supply of the OMC-160 anemometer consists of a Styrofoam and cardboard box
containing:
sensor body with integral mounting arm
cup unit
vane unit
U-bolts
mounting materials
this manual (on CD)
Note that additional materials that were simultaneously ordered for the same order might be packed in
the OMC-160 box.
4.2 Location of the sensor
Ensure that the OMC-160 anemometer will be mounted on a location where the wind that is free from
turbulence e.g. caused by obstacles nearby. Plan the OMC-160 anemometer in a free area as far as
To Next Page
Loading...