Printing Operations 5-15
Printing Operations
Weekly Timer Function (continued)
Timer Interrupt (continued)
1 Enter a 4-digit number Timer Interrupt password using the keypad on the control
panel.
If an invalid password is entered, enter a valid 4-digit password.
Timer interrupt mode
Enter password ✻✻✻✻
2 Press [START].
Input print time
0 hour(s) 05 minute(s)
3 Enter a 1-digit hour (ex. 3 hour is 3) using the keypad on the control panel. (0 ~ 9)
4 Press [START].
Input print time is
3 hour(s) 05 minute(s)
5 Enter a 2-digit minutes (ex. 7 minutes is 07) using the keypad on the control panel.
(05 ~ 60)
Input print time is
3 hour(s) 07 minute(s)
6 Press [START].
Printing is available until the set time is up.
7 When Timer Interrupt is finished, press [POWER SAVER ON/OFF].
The Shut-Off Setting Screen will be displayed.