REGULATORS
DELTA II SECOND STAGE
© 2002 Design 1997
OCEANIC® Product Service Guide
Doc. 12-2223-r03 (10/3/10)
PG-2
R = Revision
CONTENTS
TROUBLESHOOTING ..................................................................................................................................................................3
DISASSEMBLY PROCEDURE ..................................................................................................................................................... 4
REASSEMBLY PROCEDURE ...................................................................................................................................................... 6
FINAL TUNING AND TESTING .................................................................................................................................................... 9
PARTS LIST AND EXPLODED VIEW DIAGRAM ...................................................................................................................... 12
GENERAL PROCEDURES
REFER TO ...............................................................................................................................................................DOC. 12-2202
SPECIFICATIONS
Torques
P/N 4330 Coupling 100 to 120 in-lbs
P/N 4787 Screw 4 to 5 in-lbs
P/N 6332 Packing Nut 11 to 13 in-lbs
LP Hose 50 to 60 in-lbs
Opening Effort IP = 138 psi (9.5 bar)
1. Leak with adjustment knob turned fully out, clockwise.
2. No leak with knob turned in, counter clockwise, 1.5 turns.
3. Minimum effort with no leak = 1.2 inches of H
2
O, or less.
Specialty Tools
P/N 40.9313 5/32" Allen Key
P/N 40.9510 In Line Adjustment Tool
P/N 40.3367 Poppet Holding Tool
P/N 40.9512 Modied 1/4" Open End Wrench
P/N 40.6458 Front Cover Tool
P/N 40.2300 VFC-23 Cleaner - Pint
P/N 40.2308 VFC-23 Cleaner - Gallon
P/N 40.9520 O-ring Tool Kit
Oceanic approved Halocarbon Based Lubricant (See
General Procedure Doc. 12-2202 for approved list)
To Next Page
Loading...
