4-1
4. COOLING SYSTEM
FAULT OVERHAULING ····························· 4-1
FAULT OVERHAULING
1. Check whether soil of fins is blocked or damaged. Correct curved fins。 Use water and compressed air to
clean soil. If damaged area reaches 20%, please replace radiator.
2. After dismantling cooling system, check leakage situation of joint.
3. Check the oil pipe for oil leakage.If so,please repiace it.
4. Check whether the oil in the engine is sufficient.
5. Check whether the oil pipe is well connected with the engine, and replace the gasket or oil pipe in
case of oil leakage.
To Next Page
Loading...