Odes Industry UTV170-10 - Technical Specifications Overview

1.GENERAL INFORMATION
1-3
TECHNICAL SPECIFICATIONS
Item
Parameter
Dimensions
Overall length
2895mm
Overall width
1290mm
Overall height
1870mm
Seat height
780mm
Wheelbase
1840mm
Ground clearance
181mm
Engine
Type
Single cylinder, 4 stroke, forced air cooling
Number of valves
1(mechanical adjustment)
Cylinder diameter
61 mm
Piston stroke
57.8 mm
Compression ratio
9.5：1
Displacement
170cc
Maximum power
7.2Kw/7500rpm
Maximum torque
11.4N.m/4000 rpm
Idle speed
1500±100rpm
Lubrication
Type
Pressure spray
Oil pressure
0.08-0.26MPa at 3000rpm
Type of oil
SAE 15W-40
Oil quantity
1000mL
Replacement of
capacity
830-860mL
Fuel
Type
Unleaded gasoline only 93# or higher
Fuel pressure
250 kpa
Fuel tank capacity
23L
Valve clearance
Intake
0.06 to 0.08mm
Exhaust
0.06 to 0.08mm
Diameter of valve rod(IN)
New
4.975 to 4.99mm
Service limit
4.95mm
Diameter of valve rod(EX)
New
4.955 to 4.97mm
Service limit
4.93mm
Valve seat contact width(IN)
New
2.15 to 2.45mm
Service limit
2.5mm
Valve seat contact width(EX)
New
2.25 to 2.55mm
Service limit
2.6mm
Valve guide diameter
New
5.000 to 5.012mm
Service limit
5.040mm
Free length of valve spring
New
32mm
Service limit
30.5mm
Piston measurement
Size “A”
φ60.96mm—φ60.97mm