BREAK-IN PERIOD
Operation During Break-In
A break-in period of 10 operating
hours or 300 km (200 mi) is required
for the vehicle.
Engine
During the break-in period:
-Avoid full throttle operation.
-Maximum throttle should not exceed
3/4.
-Avoid sustained accelerations.
-Avoid prolonged cruising speeds.
-Avoid engine overheating.
However, brief accelerations and
speed variations contribute to a good
break-in.
Brakes
New brakes will hot operate at their
maximum efficiency until their break-in
is completed. Use extra caution.
Belt
Anew belt requires a break in period
of50 km (30 mi).During the break-in
period:
void strong acceleration and
deceleration (throttle should not
exceed3/4).
Avoid pulling a load Avoid high
speed cruising.
To Next Page
Loading...
