ODYS MultiFlat MF 700 DVB-T
2
EN
1 Important Safety Instructions
Thank you for choosing our product. Please read this manual carefully and observe all
safety and operating instructions. Store the manual in a safe place for later reference.
The device is a class 1 laser product. The corresponding label is
located on the rear side of the device. When the housing has been
opened and the lock is not engaged, visible laser radiation can
escape. Avoid looking into the laser beam by all means.
Caution
The product contains a low-power laser device. In order to ensure the safety of
the laser device, do not remove any cover and attempt to repair the unit. If any
service is needed, please contact the distributor or its authorized service center.
To reduce the risk of electric shock, do not remove the cover (or back). No user-
serviceable parts inside. Refer servicing to qualified service personnel. Unplug
the product from the wall outlet before servicing or when it is unused for a long
period of time.
The manufacturer should not hold responsibility for the damage caused by any
substitutions and modifications of the product without authorization from the
manufacturer or authorized unit.
To Next Page
Loading...
Need help?
General
