ODYS MultiFlat MF 700 DVB-T
31
EN
1. Bright&Contrast
Select the Bright&Contrast, press the ◄,► buttons to adjust the value.
2. Saturation
Select the Saturation, press the ◄,► buttons to adjust the value..
3. Conversion
Select the Conversion, press the ► button to enter, then press the ▼,▲ buttons to select
16 : 9, 4 : 3 LB or 4 : 3 PS. Press OK button to confirm and return. Press the ◄ or EXIT
button to return。
Advance Setting
Press the ▼,▲ buttons to select Advance Setting, press the OK
button to enter, the screen will display as left
In the menu, use the number buttons to input the pin code, press
the OK button to confirm. The default code is:888888
When input the PIN code, press the OK button to enter the menu
shown as left.
In the menu, press the ▼,▲ button to select item. Press OK
button to enter. Press the EXIT button to return
1. Change Pin Code
In the menu, press the ▼,▲ buttons to select Change Pin Code, press the OK button to
enter the menu shown as below.
In the menu, according to the indication to input the pin code.
Press the EXIT button to return.
2. CensorShip
Press the ▼,▲ buttons to select CensorShip, press the OK button to enter the setup
menu, then press the ► button to enter, press the ▼,▲ buttons to select items, press the
OK button to confirm the selection，press EXIT button to return.
To Next Page
Loading...
Need help?
General
