Odys Slim5L - Setting the Driver; Protecting Photos against Accidental Deletion; Viewing Images on a Television Set; Setting the Date and Time

63
DE
5.10 Setting the driver
The default driver setting is MASS.
1
Press the button to activate the configuration menu.
2
Select the “Drive Type” item in the menu and press OK to
confirm.
3
Press or to select the required driver type and press OK
to confirm.
5.11 Protecting photos against accidental deletion
This camera offers a protect function to prevent selected images being accidentally deleted.
1
Press the button to start the playback mode. Open the
photo to be protected. Press the menu button and select the
“Protect” item.
2
Select the required option from the list displayed.
The list contains four options: “Lock Current”, “Unlock Current”, “Lock All”, “Unlock All” (see also list of menu options on page 22).
The
symbol appears on the image in the LCD if the image is protected against accidental deletion. The symbol appears
when the protection option is cancelled for the photo.
Note
Protected photos cannot be deleted but can be formatted.
5.12 Viewing images on a television set
1
Connect the TV output of the camera to the video input of the
television set using the cable supplied.
2
Connect the audio input of the TV to the headphone jack of the
camera. The camera automatically recognises the television
set and switches to TV.
When still images are played on a TV, black pixels may appear
around the image.
5.13 Setting the date and time
Your digital camera can save the date and time each photo was taken and display this information in playback mode.
However, you must first set the date and the time for the camera.
1
Press the button to activate the configuration menu.
2
Select the “Date&Time” item in the menu and press OK to
confirm.