CONTINUED »
MENU SYSTEM
The Odyssey7Q has a wide range of acceptable voltage for incoming power, from 6.5
volts to 34 volts. The total wattage draw from the Odyssey7Q varies depending on the
operational mode it is set to, but is always within a very modest range from less than 8
watts to no more than 15 watts. This allows a variety of battery options to be used with the
device. While there are le recovery parameters in place, it is never a good idea to lose
power while in the midst of recording. If the incoming voltage to the Odyssey7Q drops
low enough there are a series of warnings and safeguards in place to protect the device
and the recorded les.
LOW POWER WARNINGS & SAFEGUARDS
Voltage System Status Text & Warning Operaonal Protecon
6.7v Yellow text No change to operaon
6.5v Red text & ashing warning New recordings prevented
6.0v Red text & ashing warning Current recording stopped
23
To Next Page
Loading...
