Odyssey 7Q - PLAYBACK CONTROLS (PLAY MODE ONLY)

CONTINUED »
MENU SYSTEM
UPPER TOOL BAR (PLAY MODE)
UPPER TOOL BAR CONTROLS (PLAY MODE)
1
☼ MENU BUTTON
7
REC/PLAY TOGGLE
2
SYSTEM STATUS
8
CLIP METADATA
3
MARKER CONTROLS (PLAY MODE ONLY)
9
PLAYLIST
4
SSD1 STATUS
10
AUDIO
5
SSD SAFE EJECT
6
SSD2 STATUS
MARKER CONTROLS (PLAY MODE ONLY)
<PREV
▲
►◄
NEXT>
MARKERS:
Markers are agged reference points within a le. Single ags as well as in/out
points can be marked. Used in conjunction with the Convergent Design Apple
ProRes Transfer Utility (1.4 or above) markers are translated into Final Cut 7
and FCPX .XML les. These can be imported into Final Cut 7, FCPX and Adobe
Premiere. Up to 16 In and 16 Out points can be marked in a single clip, but more
than one pair of In and Out points can only be read by FCPX.
OUTPUT STATUS/PROJECT RATE (PLAY MODE ONLY)
29PSF
4:2:2
Displays current SDI/HDMI output status and settings. Tapping button brings up detailed
information on the Input/Output Status and allows you to select input and output settings
from available options.
INPUT OPTIONS
VIDEO CADENCE:
(See MENU SYSTEM // SETUP MENU)
TIMECODE SOURCE:
(See MENU SYSTEM // SETUP MENU)
OUTPUT OPTIONS
OUTPUT OVERLAYS:
Turn Output Overlays on or off
RECORD TALLY:
Turn Record Tally on or off
32