Odyssey 7Q - RECORD; POST

RELEASE NOTES
RECORD
• 4K video currently supported over 4x SDI, not 2x 3G-SDI or HDMI.
• 1080p60 from Atomos or Blackmagic Design HDMI to SDI converters currently not supported.
• 1080p60 from Blackmagic Design cameras currently not supported.
• Audio at the last few frames of an Apple ProRes 422(HQ) le occasionally records static. Add two
seconds of pre- and post-roll to shots to avoid.
• ARRIRAW 4:3 mode is currently unsupported.
• On FS700, occasionally when switching from “4K RAW->4K ProRes” to “4K RAW->HD ProRes” an
ERROR=8 message may occur. Cycle power to correct.
POST
• PLAY Markers require use of CD ProRes Utility 1.4.4 to export to post.
• FS RAW les appear green when imported directly into SpeedGrade. Pending Adobe update,
import via dynamic link from Premier.
• Canon Cinema 4K half RAW does not work in Adobe. Working with Adobe to resolve.
• In Resolve 11 Lite, FS700 RAW (CinemaDNG) les that are underexposed may appear green when
using “Auto-Color” setting. Working with Blackmagic Design to resolve.
OTHER NOTES
• Canon Half Raw 4K x 1080 is not supported
• Canon Half Raw 3840x2160 23.98-120 is not supported
• Remote Trigger is not supported at this time.
• Using HDMI source in multi steam viewing is not supported at this time.
• 720p 30 /25 is not supported at this time.
• 1080p50/60 support over HDMI is not supported, due to a hardware constraint.
• SD NTSC /PAL is not supported
• Recording in multi-stream in not supported at this time.
• User Loadable LUTs are not supported at this time.
• Other avors of ProRes are not supported at this time.
• File naming matching the camera in ProRes or DPX in not supported at this time.
• LTC timecode trigger is not supported at this time.
• Adobe Premier FS700 Raw (CinemaDNG le support) is pending next update from Adobe to
correct issue with highlights turning to pink.
• Adobe Speed Grade FS700 Raw (CinemaDNG le support) is pending next update from Adobe to
correct imported frames for showing as green. Also note that if les are rst imported via Premium,
this circumvents this issues.
• Resolve 11 Lite FS700 Raw (CinemaDNG le support) underexposed Images when using “Auto-
Color” may appear green. We are in contact with BlackMagic about this issue.