OHAUS Defender D24PE30FR

Questions and Answers

R
ronaldbaileyAug 13, 2025
What does 'CAL E' mean on OHAUS Measuring Instruments?
- J
  janicewhiteAug 13, 2025
  The 'CAL E' message on OHAUS Measuring Instruments indicates that the calibration value is outside of allowable limits.
R
Robert OwensAug 17, 2025
Why is the battery icon flashing on my OHAUS Measuring Instruments?
- K
  kristen28Aug 17, 2025
  The battery icon flashes on your OHAUS Measuring Instruments because the battery is empty.
A
Alexandra SilvaAug 20, 2025
What does Error 8.4 mean on OHAUS Measuring Instruments?
- J
  Jesus RodriguezAug 20, 2025
  Error 8.4 on OHAUS Measuring Instruments means the weight reading is below the underload limit.
M
Michael GonzalezAug 25, 2025
What does 'rEF.Err' mean on OHAUS Measuring Instruments?
- R
  rachelprinceAug 25, 2025
  The 'rEF.Err' message on OHAUS Measuring Instruments indicates that the reference weight is too small. Specifically, the weight on the pan is too small to define a valid reference weight.
E
Emily Young MDAug 28, 2025
What does Error 8.1 mean on OHAUS Measuring Instruments?
- D
  donna95Aug 28, 2025
  Error 8.1 on your OHAUS Measuring Instruments indicates that the weight reading exceeds the Power On Zero limit.
L
Leslie HermanSep 1, 2025
What does Error 8.2 mean on OHAUS Measuring Instruments?
- A
  Amanda RodriguezSep 1, 2025
  Error 8.2 on your OHAUS Measuring Instruments means that the weight reading is below the Power On Zero limit.
N
nancyjonesSep 4, 2025
What does Error 8.5 mean on my OHAUS Measuring Instruments?
- M
  Michael MillerSep 4, 2025
  Error 8.5 on your OHAUS Measuring Instruments means that the device was tared at one unit, but after switching to another unit, the tare value exceeds the maximum.
K
Krista HillSep 8, 2025
What does 'Lo.rEF' mean on OHAUS Measuring Instruments?
- P
  parkermargaretSep 8, 2025
  The 'Lo.rEF' message on OHAUS Measuring Instruments is a warning that the Average Piece Weight is too small.