Need help?Do you have a question about the OHAUS DISCOVERY BALANCE and is the answer not in the manual?
General| Weight | Varies by model |
|---|---|
| Model | Discovery |
| Capacity | Varies by model, up to 310 g |
| Pan Size | Varies by model |
| Display | LCD |
| Power Supply | AC adapter |
| Calibration | Internal calibration |
| Weighing Units | Milligram; Gram; Kilogram; Ounce; Pound; Carat; Grain; Newton |
| Interface | RS232, USB |
General guidance for identifying and resolving common balance issues.
Lists error codes, their causes, and recommended remedies.
Overview of load cell issues and the start of removal procedures.
Detailed steps for safely removing the load cell from the balance.
Instructions for disassembling the load cell for inspection or repair.
Steps for reassembling the load cell after disassembly or repair.
Procedure for installing a new or reassembled load cell back into the balance.
Procedure for correcting off-center load errors using adjustment screws.
Procedure for performing span calibration within the service menu.
Procedure for performing internal calibration via the service menu.
Steps to restore EEPROM data using the service tool.
Instructions for using the software tool when replacing a load cell.
Using the tool to install a new main PCB.
Procedure for updating the balance's firmware using the tool.
To Next Page