How to fix OHAUS Scales with no display?
If your OHAUS Scales show no display, first ensure the AC adapter is properly connected. If it is, the batteries may be exhausted, and you should replace them.
Why calibration procedures do not work on OHAUS Scales?
If the calibration procedures for your OHAUS Scales do not work, ensure that you are using the correct calibration masses. Also, refer to error code note ERR4.
Why are OHAUS Scales balance readings unstable?
If you notice that the balance readings on your OHAUS Scales are unstable, it could be due to drafts from air conditioning vents or vibration from nearby appliances. Try moving or shielding the balance from these external factors.
What to do if OHAUS Scales show incorrect weight reading?
If your OHAUS Scales are showing an incorrect weight reading, it could be due to a couple of things. First, the balance might be out of calibration, so you should calibrate it. Second, make sure you re-zero the balance before weighing. Press the ON/ZERO Off button with no weight on the platform, and then weigh your item.
How to fix OHAUS Scales when calibration procedures do not work?
If calibration procedures aren't working on your OHAUS Scales, the issue might be with the calibration masses you're using. Ensure you're using the correct masses. Also, check error codes note ERR4.
Why are my OHAUS Scales giving an incorrect weight reading?
If your OHAUS Scales are showing an incorrect weight reading, it could be due to a calibration issue. Try calibrating the scale. Also, make sure to press the ON/ZERO Off button with no weight on the platform before weighing your item.
Why OHAUS Scales readings are unstable?
If your OHAUS Scales readings are unstable, it might be because of drafts from air conditioning or vibrations from nearby appliances. Try moving the balance or shielding it from these external factors.
What to do if the battery indicator is flashing on OHAUS Scout Pro Balance Scales?
If your OHAUS Scales' battery indicator is flashing, it means the batteries are weak and need to be replaced.
Why can't OHAUS Scout Pro Balance display weight in a particular weighing unit?
If you are unable to display weight in a particular weighing unit on your OHAUS Scales, the weighing unit may not be activated in the menu. Go to the Units menu and set the desired units to ON. Alternatively, the mode may be preventing unit change; exit Hold or Totalize mode.
Why OHAUS Scout Pro Balance Scales have no display?
If your OHAUS Scales display shows nothing, first ensure the power adapter is properly connected. If it is, the batteries might be exhausted, so try replacing them.
General| Calibration | External Calibration |
|---|---|
| Display | LCD with backlight |
| Readability | 0.1 g |
| Power Supply | AC adapter or 4 AA batteries |
| Operating Temperature | 10°C to 40°C |
| Units of Measurement | g, kg, lb, oz |
| Interface | RS232 |
| Capacity | 200 g |
Important safety guidelines for operating the balance to prevent hazards.
Guidance on unpacking and assembling parts like the shipping lock, platform, and draft shield.
Recommendations for choosing an optimal environment for balance performance.
Instructions for connecting the balance to a power source via battery or AC adapter.
Identifies and explains the balance's buttons, display elements, and indicators.
Details the primary, secondary, and menu functions of the balance's control buttons.
Explains symbols used on the display and control panel to simplify operation.
Describes how to access and move through the balance's various menus and settings.
Step-by-step guide on how to enter specific menus like CAL, SETUP, UNITS, and END.
Covers settings like Auto-Off, Display Hold, Totalize, and Specific Gravity within the SETUP menu.
Instructions on how to configure measurement units, parts counting, and percentage weighing modes.
Detailed steps for using the parts counting feature, including standard and enhanced modes.
Guide on how to use the balance for percentage calculations based on a reference weight.
Explains how to activate and use the Display-Hold function to capture the highest stable reading.
Instructions on using the Totalize mode to store and sum multiple weight measurements.
Procedures for calculating specific gravity using the balance's specialized mode.
Covers advanced functions like Weigh Below for specialized weighing applications.
Explains how to use the lock switch to prevent unauthorized menu changes.
Guidelines for maintaining the balance's cleanliness and ensuring proper operation.
Helps diagnose and resolve common problems like no display or incorrect readings.
Explains various error codes displayed by the balance and their remedies.
Lists optional accessories such as interface kits, carrying cases, and calibration masses.
Provides detailed technical specifications like capacity, readability, and operating conditions.
Details model-specific capacities and corresponding readability for various units.
To Next Page
