What to do if I cannot calibrate my OHAUS Scout STX Scales?
If you cannot calibrate your OHAUS Scales, ensure that the security switch is turned off. Also, make sure that the environment is stable and move the balance to a suitable location if needed. Finally, verify that you are using the correct calibration masses.
How to resolve 'Invalid Piece Weight' error on OHAUS Scales?
If your OHAUS Scales display 'Invalid Piece Weight,' the average piece weight might be too small. Increase the average piece weight.
Why are my OHAUS Scout STX inaccurate?
If your OHAUS Scales are showing poor accuracy, you might need to perform a calibration. Also, the surrounding environment could be unstable. Try moving the balance to a more suitable location.
Why are my OHAUS Scales showing poor accuracy?
If your OHAUS Scales are showing poor accuracy, first, perform calibration. Also, make sure that the scales are in a stable environment. If the environment is unstable, move the balance to a more suitable location.
Why can't I change menu settings on my OHAUS Scout STX?
If you cannot change the menu settings on your OHAUS Scales, ensure that the security switch is turned off.
What does 'Low Reference weight' mean on OHAUS Scout STX?
If your OHAUS Scales show a 'Low Reference weight' message, it means the reference weight is too small. Increase the sample size.
What to do if OHAUS Scout STX Scales display 'Busy (tare, zero, printing)'?
If your OHAUS Scales display 'Busy (tare, zero, printing)', wait until the current operation is completed.
How to unlock menu settings on OHAUS Scout STX Scales?
If you're unable to change menu settings on your OHAUS Scales, make sure the security switch is turned off.
What does 'Operation Timeout' mean on OHAUS Scales?
If your OHAUS Scales display an 'Operation Timeout' message, it may be because the weight reading is not stable. Move the balance to a more suitable location.
What does 'Invalid Piece Weight' mean on OHAUS Scales?
If your OHAUS Scales show 'Invalid Piece Weight', the average piece weight is too small. You'll need to increase the average piece weight.
General| Display | LCD |
|---|---|
| Housing Material | ABS Plastic |
| Calibration | External |
| Power | AC Adapter / Battery |
| Communication | RS232 |
| Operating Temperature | 10°C to 40°C |
| Weighing Units | g, oz, ozt, dwt, ct, gn, tl (customizable) |
| Stabilization Time | 1.5 seconds |
| Relative Humidity | 10% – 80% relative humidity, non-condensing |
Overview of the Scout STX balance and its available models.
Defines signal words and warning symbols used for safety.
Lists essential safety measures for installation, operation, and maintenance.
Highlights the balance's touch controls for quick access to functions.
Guide to assembling the balance with its various components.
Instructions on how to release the balance's transport lock.
Procedure for correctly attaching the weighing pan to the balance.
Description of the security slot for cable and lock accessory.
Explanation of the balance's physical buttons and their functions.
Description of the touch-sensitive display and main application screen elements.
Guide to using the balance for basic weight determination.
How to configure settings like capacity bar, units, and print options.
Configuration options for parts counting: name, optimization, units, print.
Methods for establishing Average Piece Weight (APW) and sample size.
Configuring sample name, units, and print settings for percent weighing.
Procedure to set or update the reference weight value.
Configuring averaging time, automatic mode, sample name, units, and print.
Step-by-step instructions for measuring solid density with water.
Procedure for measuring solid density with an auxiliary liquid.
Method to measure liquid density using a calibrated sinker.
Configuring sample name, units, and print settings for check weighing.
How to define Over and Under limits for the check weighing process.
Configuring liquid volume, sample name, units, and print for mole weighing.
Inputting the molar mass value for substance calculation.
How molarity is calculated when liquid volume is set.
Overview of extra functionalities available for the balance.
Instructions for using the weigh below hook for suspended weighing.
How to navigate through the balance's menus using the touch display.
Step-by-step guide to modifying various menu settings.
Periodically verifying calibration and performing internal calibration if needed.
Safe methods for cleaning the balance, including warnings.
Table of common symptoms, causes, and remedies for balance issues.
Contact details for OHAUS service assistance and technical support.
Detailed technical specifications including ambient conditions and model variations.
To Next Page