Need help?Do you have a question about the OHAUS Scout Pro Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Operating Temperature | 10°C to 40°C |
| Display Features | Backlit |
| Capacity | 200 g - 6000 g (depending on model) |
| Readability | 0.01 g - 1 g (depending on model) |
| Power | AC Adapter or 4 AA batteries |
| Calibration | External |
| Communication | RS232 (optional) |
| Units of Measurement | g, oz, ozt, dwt, lb, ct, grains, N, custom |
| Stabilization Time | 3 seconds |
| Interface | RS232 or USB (optional) |
Lists and explains error codes displayed by the balance.
Step-by-step guide for replacing the main PC board.
Detailed instructions for replacing the balance transducer.
Procedure to measure the balance's repeatability.
Test to check balance accuracy with off-center loads.
Procedure to assess balance linearity across its range.
Guide for downloading and installing the service software.
Detailed guide on operating the ConfigTool software.
Procedure for reconfiguring the balance after PC board replacement.
To Next Page