To Next Page
S
Steven MartinAug 18, 2025
Why my OHAUS Scales cannot turn on?
- Ggregory09Aug 18, 2025
If your OHAUS Scales display 'Cannot turn on', it is because there is no power to the balance.
Why my OHAUS Scales cannot turn on?
If your OHAUS Scales display 'Cannot turn on', it is because there is no power to the balance.
Why my OHAUS Scales cannot calibrate?
If your OHAUS Scales display 'Cannot calibrate', it might be because the security switch is in a locked position.
What does Err 8.1 mean on OHAUS Scales?
If your OHAUS Scales display 'Err 8.1', it means the weight exceeds the power on zero range.
What does Err 8.2 mean on OHAUS Scales?
If your OHAUS Scales display 'Err 8.2', it indicates that the weight is below the power on zero range.
What does Err 8.4 mean on OHAUS Scales?
If your OHAUS Scales display 'Err 8.4', it indicates an under load condition, which typically means the pan has been removed.
Why OHAUS Scales show poor accuracy?
If your OHAUS Scales display 'Poor accuracy', it could be due to improper calibration or an unstable environment.
What does Err 8.5 mean on OHAUS Scout?
If your OHAUS Scales display 'Err 8.5', it means the tare is out of range.
What does Err 8.6 mean on OHAUS Scales?
If your OHAUS Scales display 'Err 8.6', it means that the displayed value exceeds 999999, which is possible in Totalization mode.
What does CAL E mean on OHAUS Scales?
If your OHAUS Scales display 'CAL E', it means there was a failure to calibrate.
What does ref.err mean on OHAUS Scout?
If your OHAUS Scales display 'ref.err', it means there is a parts counting or percentage error because the sample weight is less than 1d. The balance shows an error and then exits parts counting or goes to [Clr.ApU].
Lists essential safety warnings and precautions for installation and operation of the balance.
Instructions to identify and assemble balance components before use.
Details how to release the transportation lock on the balance for proper setup.
Describes the correct method for installing weighing pans, differentiating between round and rectangular types.
Explains how to connect the AC adapter and install batteries for power.
Outlines the necessity and procedure for initial calibration to ensure accuracy.
Identifies and explains the functions of the balance's control panel buttons.
Describes how to perform span calibration to ensure accurate weighing results.
Lists common symptoms, their possible causes, and remedies for balance issues.
General| Display | LCD with backlight |
|---|---|
| Operating Temperature | 10°C to 40°C (50°F to 104°F) |
| Overload Protection | Yes |
| Stainless Steel Platform | Yes |
| Readability | Varies by model (e.g., 0.01g, 0.1g, 1g) |
| Power Supply | AC adapter or 4 AA batteries (depending on model) |
| Communication | RS232 |
| Tare Range | To capacity by subtraction |
| Units of Measurement | g, kg, oz, lb, pcs, % |
| Auto-Off | Yes |
| Calibration | External calibration (some models may have internal calibration) |
