To Next Page
D
debrajohnsonSep 12, 2025
What does Lo.ref mean on OHAUS Scout Scales?
- LLuis BarnettSep 12, 2025
If your OHAUS Scales display 'Lo.ref', it indicates that the Percent Reference weight or APW is too low for accurate results.
What does Lo.ref mean on OHAUS Scout Scales?
If your OHAUS Scales display 'Lo.ref', it indicates that the Percent Reference weight or APW is too low for accurate results.
What does USB.Err mean on OHAUS Scout?
If your OHAUS Scales display 'USB.Err', it means that the menu or app file cannot be found in the U-disk.
General| Display | LCD with backlight |
|---|---|
| Operating Temperature | 10°C to 40°C (50°F to 104°F) |
| Overload Protection | Yes |
| Stainless Steel Platform | Yes |
| Readability | Varies by model (e.g., 0.01g, 0.1g, 1g) |
| Power Supply | AC adapter or 4 AA batteries (depending on model) |
| Communication | RS232 |
| Tare Range | To capacity by subtraction |
| Units of Measurement | g, kg, oz, lb, pcs, % |
| Auto-Off | Yes |
| Calibration | External calibration (some models may have internal calibration) |
Lists essential safety warnings and precautions for installation and operation of the balance.
Instructions to identify and assemble balance components before use.
Details how to release the transportation lock on the balance for proper setup.
Describes the correct method for installing weighing pans, differentiating between round and rectangular types.
Explains how to connect the AC adapter and install batteries for power.
Outlines the necessity and procedure for initial calibration to ensure accuracy.
Identifies and explains the functions of the balance's control panel buttons.
Describes how to perform span calibration to ensure accurate weighing results.
Lists common symptoms, their possible causes, and remedies for balance issues.
