What causes 'Operation Timeout' on OHAUS Scout STX Scales?
If your OHAUS Scales are timing out during operation, it could be due to an unstable weight reading. Try moving the balance to a more stable location.
General| Display | LCD |
|---|---|
| Housing Material | ABS Plastic |
| Calibration | External |
| Power | AC Adapter / Battery |
| Communication | RS232 |
| Operating Temperature | 10°C to 40°C |
| Weighing Units | g, oz, ozt, dwt, ct, gn, tl (customizable) |
| Stabilization Time | 1.5 seconds |
| Relative Humidity | 10% – 80% relative humidity, non-condensing |
Overview of the Scout STX balance and its available models.
Defines signal words and warning symbols used for safety.
Lists essential safety measures for installation, operation, and maintenance.
Highlights the balance's touch controls for quick access to functions.
Guide to assembling the balance with its various components.
Instructions on how to release the balance's transport lock.
Procedure for correctly attaching the weighing pan to the balance.
Description of the security slot for cable and lock accessory.
Explanation of the balance's physical buttons and their functions.
Description of the touch-sensitive display and main application screen elements.
Guide to using the balance for basic weight determination.
How to configure settings like capacity bar, units, and print options.
Configuration options for parts counting: name, optimization, units, print.
Methods for establishing Average Piece Weight (APW) and sample size.
Configuring sample name, units, and print settings for percent weighing.
Procedure to set or update the reference weight value.
Configuring averaging time, automatic mode, sample name, units, and print.
Step-by-step instructions for measuring solid density with water.
Procedure for measuring solid density with an auxiliary liquid.
Method to measure liquid density using a calibrated sinker.
Configuring sample name, units, and print settings for check weighing.
How to define Over and Under limits for the check weighing process.
Configuring liquid volume, sample name, units, and print for mole weighing.
Inputting the molar mass value for substance calculation.
How molarity is calculated when liquid volume is set.
Overview of extra functionalities available for the balance.
Instructions for using the weigh below hook for suspended weighing.
How to navigate through the balance's menus using the touch display.
Step-by-step guide to modifying various menu settings.
Periodically verifying calibration and performing internal calibration if needed.
Safe methods for cleaning the balance, including warnings.
Table of common symptoms, causes, and remedies for balance issues.
Contact details for OHAUS service assistance and technical support.
Detailed technical specifications including ambient conditions and model variations.
To Next Page