Why is the battery indicator flashing on my OHAUS Scales?
If the battery indicator on your OHAUS Scales is flashing, this usually means the batteries are weak. Replace them to resolve the issue.
Why I am unable to display weight in a particular weighing unit on OHAUS Scales?
If you're unable to display weight in a specific unit on your OHAUS Scales, it could be for a couple of reasons. First, the weighing unit might not be activated in the menu, so use the Units menu to turn the desired units ON. Second, a mode might be preventing the unit change, so exit Hold or Totalize mode.
General| Calibration | External Calibration |
|---|---|
| Display | LCD with backlight |
| Readability | 0.1 g |
| Power Supply | AC adapter or 4 AA batteries |
| Operating Temperature | 10°C to 40°C |
| Units of Measurement | g, kg, lb, oz |
| Interface | RS232 |
| Capacity | 200 g |
Important safety guidelines for operating the balance to prevent hazards.
Guidance on unpacking and assembling parts like the shipping lock, platform, and draft shield.
Recommendations for choosing an optimal environment for balance performance.
Instructions for connecting the balance to a power source via battery or AC adapter.
Identifies and explains the balance's buttons, display elements, and indicators.
Details the primary, secondary, and menu functions of the balance's control buttons.
Explains symbols used on the display and control panel to simplify operation.
Describes how to access and move through the balance's various menus and settings.
Step-by-step guide on how to enter specific menus like CAL, SETUP, UNITS, and END.
Covers settings like Auto-Off, Display Hold, Totalize, and Specific Gravity within the SETUP menu.
Instructions on how to configure measurement units, parts counting, and percentage weighing modes.
Detailed steps for using the parts counting feature, including standard and enhanced modes.
Guide on how to use the balance for percentage calculations based on a reference weight.
Explains how to activate and use the Display-Hold function to capture the highest stable reading.
Instructions on using the Totalize mode to store and sum multiple weight measurements.
Procedures for calculating specific gravity using the balance's specialized mode.
Covers advanced functions like Weigh Below for specialized weighing applications.
Explains how to use the lock switch to prevent unauthorized menu changes.
Guidelines for maintaining the balance's cleanliness and ensuring proper operation.
Helps diagnose and resolve common problems like no display or incorrect readings.
Explains various error codes displayed by the balance and their remedies.
Lists optional accessories such as interface kits, carrying cases, and calibration masses.
Provides detailed technical specifications like capacity, readability, and operating conditions.
Details model-specific capacities and corresponding readability for various units.
To Next Page
