What does error 7.0 mean on OHAUS DEFENDER Scales?
Error 7.0 on OHAUS Scales indicates an unstable weight reading when defining reference weight. This is an unstable error, so check the platform location.
What does LOW.rEF mean on OHAUS DEFENDER?
LOW.rEF on OHAUS Scales means that the average piece weight of the parts is small. Use parts with an average piece weight greater than or equal to 1 division.
What does REF.WT Err mean on OHAUS DEFENDER?
REF.WT Err on OHAUS Scales means that the average piece weight of the parts is too small. Use parts with an average piece weight greater than or equal to 0.1 division.
Why does the battery on my OHAUS DEFENDER Scales T31P fail to charge fully?
If the battery on your OHAUS Scales T31P fails to charge fully, the battery is likely defective. Have the battery replaced by an authorized Ohaus service dealer.
General| Calibration | External Calibration |
|---|---|
| Display | LCD with backlight |
| Power | AC adapter or rechargeable battery |
| Construction | Stainless steel platform |
| Interface | RS232 |
| Approval | NTEP approved |
| Application | Weighing |
| Operation | Keypad |
| Design Features | Overload protection |
| Units of Measurement | Kilogram, Gram, Pound, Ounce (depending on model) |
To Next Page
