What to do if OHAUS Measuring Instruments shows “Close Cover”?
If the OHAUS Measuring Instrument displays “Close Cover”, it means the cover needs to be closed before starting the test. Please close the cover to proceed.
What to do if OHAUS Measuring Instruments shows “Tare”?
If the OHAUS Measuring Instrument shows “Tare”, it indicates that the pan weight needs to be set to zero. Press the Tare button to zero the pan weight.
Why is the weight value blinking on my OHAUS Measuring Instruments?
If the OHAUS Measuring Instrument displays a blinking weight value, it means the sample weight is less than 0.5g. Increase the sample size to resolve this issue.
What does Err 8.3 mean on OHAUS Measuring Instruments?
If the OHAUS Measuring Instrument shows Err 8.3, it means the weight on the pan support exceeds capacity. Remove weight from the pan support.
What does Err 8.1 mean on OHAUS Measuring Instruments?
If the OHAUS Measuring Instrument shows Err 8.1, it indicates that the pan support has a load during power on. Remove any weight from the pan support.
What does Err 8.5 mean on OHAUS Measuring Instruments?
If the OHAUS Measuring Instrument displays Err 8.5, it means the analyzer temperature is above 50°C. Cool down the analyzer.
What does Err 8.6 mean on OHAUS Measuring Instruments?
If the OHAUS Measuring Instrument shows Err 8.6, it means the analyzer temperature is higher than the target setting. Cool down the analyzer.
How to improve accuracy of OHAUS Measuring Instruments?
If you are experiencing poor accuracy with your OHAUS Measuring Instrument, perform a calibration. Also, move the analyzer to a more stable location.
What does Err 8.4 mean on OHAUS Measuring Instruments?
If the OHAUS Measuring Instrument shows Err 8.4, it indicates that the pan support was removed during weighing. Re-install the pan support.
What does Err 8.2 mean on OHAUS Measuring Instruments?
If the OHAUS Measuring Instrument shows Err 8.2, it means the pan support was removed prior to power on. Install the pan support.
General| Heating Method | Infrared |
|---|---|
| Pan Size | 90 mm |
| Display | LCD |
| Operating Temperature Range | 10 °C to 30 °C |
| Interface | RS232 |
| Calibration | External |
| Power Requirements | 50/60Hz |
| Stabilization Time | ≤3 seconds |
To Next Page
