How to fix OHAUS Navigator NVT4201 that cannot turn on?
If your OHAUS Scales won't turn on, the issue is likely due to a lack of power. Verify the connections and voltage to ensure the scale is receiving power.
What to do if OHAUS Navigator NVT4201 Scales cannot calibrate?
If you cannot calibrate your OHAUS Scales, the issue might stem from an unstable environment or using an incorrect calibration weight. Try moving the balance to a more stable location. If that doesn't work, make sure you are using the correct calibration weight.
What does 'Lo ref' mean on OHAUS Scales?
If your OHAUS Scales display 'Lo ref', it means the reference weight is too low. Increase the reference weight to resolve this issue.
Why can't I access a mode on my OHAUS Navigator NVT4201?
If you cannot access a specific mode on your OHAUS Scales, it is possible that the mode is not enabled. Enter the menu and enable the desired mode.
Why can't I access a unit on my OHAUS Scales?
If you cannot access a specific unit on your OHAUS Scales, it is possible that the unit is not enabled. Enter the menu and enable the unit.
General| Maximum Capacity | 4200 g |
|---|---|
| Readability | 0.1 g |
| Linearity | ± 0.2 g |
| Legal for Trade | No |
| Auto-off | Yes |
| Tare Range | Full capacity |
| Repeatability | 0.1 g |
| Weighing Units | g, kg, lb, oz |
| Power Supply | AC adapter |
| Calibration | External |
| Display | LCD |
| Operating Temperature | 10°C to 40°C |
| Operating Humidity | 0 to 85 % |
| Interface | RS232 |
To Next Page
