OHAUS PR4202/E - 5. Menu Settings; 5.1 Menu Navigation; 5.1.1 Changing Settings

PR Series Balance EN-13
5. MENU SETTINGS
5.1 Menu Navigation
Calibration
Setup
Unit RS232 Print
GLP
Reset
Lock
InCal
Filter Level
Gram Baud Rate
Stable Only
Header 1
Reset All
Calibration
Cal Adjust
AZT
Kilogram
Parity
Numeric Only
Header 2
Setup
Span Cal
Auto Tare
Milligram
Handshake
Single Header
Header 3
RS232
Linearity Cal
Graduations
Carat
Auto Print
Balance
Name
Print
Date Format
Pound Header
User
Name
GLP
Date Setting
Ounce
Date and Time
Project
Name
Reset
Time Format
Ounce Troy
Balan
ce ID
Time Setting
Penny
Weight
*
Balance Name
Brightness
Newton
User Name
Auto Dim
Grain
Project Name
LFT
Application
Name
Result
Gross Weight
Net Weight
Tare Weight
Line Feed
* Penny weight is not available for NTEP model.
5.1.1 Changing Settings
To change a menu setting, navigate to that setting using the following steps:
Enter the Menu
Long press the Menu button to enter the
Menu.
Select the Sub
-Menu
Press
No to step between the sub-menus, and press Yes to enter the sub-menu.
Select the Menu Item
Press No to step through the Menu Items, and press Yes to enter the displayed Menu Item.