Why can't I access a mode on my OHAUS Scales?
If you cannot access a specific mode on your OHAUS scale, the mode may not be enabled. Go to the menu settings and enable the mode you wish to use.
Why can't I access a unit on my OHAUS Ranger 3000?
If you cannot access a specific unit on your OHAUS scale, the unit may not be enabled. Go to the menu settings and enable the unit you wish to use.
What does Err 9.5 mean on OHAUS Ranger 3000 Scales?
If your OHAUS scale displays 'Err 9.5', it means there is a calibration data error, specifically that calibration data is not present.
What does Lo.ref mean on OHAUS Ranger 3000?
If your OHAUS scale displays 'Lo.ref', it means there is a low reference weight warning. Increase the reference weight used on the scale.
What does ref.err mean on OHAUS Ranger 3000?
If your OHAUS scale displays 'ref.err', it indicates an unacceptable reference weight. This means the reference weight is too small to define a valid reference. Increase the reference weight.
General| Display | LCD with white LED backlight |
|---|---|
| Calibration | External calibration |
| Auto-off | Yes |
| Power Supply | AC adapter or rechargeable battery |
| Communication | RS232 |
| Operating Temperature | -10°C to 40°C |
| Applications | Weighing, Parts Counting, Check Weighing, Dynamic Weighing, Accumulation, Display Hold |
| Interface | RS232 |
| Readability | 0.1g |
| Pan Size | 225 mm x 300 mm |
| Protection | IP54 |
| Units of Measurement | g, kg, lb, oz, lb:oz, ct, N, custom |
Lists essential safety precautions to follow before and during scale operation.
How to use the scale for check weighing, check percent, and check count.
Detailed procedure for check count functionality.
Detailed procedure for check weighing functionality.
Detailed procedure for check percent functionality.
Instructions for performing scale calibration procedures.
Details on setting various scale parameters and defaults.
Enables or disables specific operational modes like Weigh, Percent, Count, Check, and Dynamic.
Details on audit trail sealing for US and Canada compliance.
Steps for setting up the scale for legal for trade use.
Lists common problems, their causes, and remedies for the scale.
Details compliance marks and verification requirements for weighing instruments.
To Next Page
