What to do if I cannot access a mode on my OHAUS Scales?
If you cannot access a specific mode on your OHAUS Scales, it is likely that the mode is not enabled. Go to the menu and enable the desired mode.
What to do if I cannot access a unit on my OHAUS Scales?
If you cannot access a specific unit on your OHAUS Scales, it is likely that the unit is not enabled. Go to the menu and enable the desired unit.
What does Lo.ref mean on OHAUS RANGER 4000?
If your OHAUS Scales display shows 'Lo.ref', it means there is a low reference weight warning. Increase the reference weight used.
What does ref.err mean on OHAUS RANGER 4000 Scales?
If your OHAUS Scales display shows 'ref.err', it indicates an unacceptable reference weight. The reference weight is too small. Increase the reference weight.
General| Readability | 0.1 g |
|---|---|
| Display | LCD with backlight |
| Power Supply | AC adapter |
| Battery Life | 100 hours |
| Legal for Trade | Yes |
| Protection | IP54 |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Relative Humidity | 10% |
| Interface | RS232 |
| Units of Measurement | g, kg, lb, oz |
To Next Page
