Ohaus Corporation
7 Campus Drive, Suite 310
Parsippany, NJ 07054 USA
For customer service call Toll Free
1-800-672-7722
The 5-0-5 has a 511 grain capacity, and features a three poise system. Widely
spaced, deep beam notches prevent accidental movement of the poises.
Calibrations on left side of beam are in full 10 grain increments. Two smaller poises
on right side of beam adjust from 0.1 to 10 grains. This was the first reloading scale
to utilize magnetic damping to eliminate unnecessary beam oscillation. It has a
rugged die-cast base with a large leveling leg for extra stability on the bench. Self-
aligning agate bearings support the hardened steel beam pivots to guarantee
sensitivity of 0.1 grain.
This scale is manufactured by
Ohaus Corporation
Toll Free (800) 672-7722
To Next Page
Loading...
