What to do if calibration procedures do not work on OHAUS Scout pro Scales?
If the calibration procedures are not working on your OHAUS Scales, one potential cause is using incorrect calibration masses. Make sure you are using the correct masses.
How to fix OHAUS Scales with no display?
If your OHAUS Scales show no display, first ensure the AC adapter is properly connected. If it is, the batteries may be exhausted, and you should replace them.
Why do my OHAUS Scales show an incorrect weight reading?
If your OHAUS Scales are showing an incorrect weight reading, there are a couple of potential reasons. First, the balance might be out of calibration, so you should calibrate it. Second, the balance may not have been rezeroed before weighing. To fix this, press the ON/ZERO Off button with nothing on the platform, and then weigh your item.
Why are my OHAUS Scout pro giving an incorrect weight reading?
If your OHAUS Scales are showing an incorrect weight reading, it could be due to a calibration issue. Try calibrating the scale. Also, make sure to press the ON/ZERO Off button with no weight on the platform before weighing your item.
Why calibration procedures do not work on OHAUS Scout pro Scales?
If the calibration procedures for your OHAUS Scales do not work, ensure that you are using the correct calibration masses. Also, refer to error code note ERR4.
Why are OHAUS Scales balance readings unstable?
If you notice that the balance readings on your OHAUS Scales are unstable, it could be due to drafts from air conditioning vents or vibration from nearby appliances. Try moving or shielding the balance from these external factors.
What to do if my OHAUS Scout pro Scales have no display?
If there is no display on your OHAUS Scales, it could be due to a couple of reasons. First, check if the power adapter is properly connected and connect it if it isn't. Second, the batteries might be exhausted, in which case you should replace them.
Why is the battery indicator flashing on my OHAUS Scout pro?
If the battery indicator on your OHAUS Scales is flashing, it means the batteries are weak and need to be replaced.
What to do if my OHAUS Scout pro Scales display an error code?
If an error code is displayed on your OHAUS Scales, it indicates various internal and external problems. You should review the error code table and take appropriate action based on the specific code shown.
Why are the readings on my OHAUS Scales unstable?
Unstable readings on your OHAUS Scales can be caused by drafts from air conditioning vents or vibration from other appliances. Try moving or shielding the balance from these external air currents or vibrations.
General| Operating Temperature | 10°C to 40°C |
|---|---|
| Overload Protection | Yes |
| Display | LCD |
| Power | AC adapter or 4 AA batteries |
| Communication | RS-232 |
| Units of Measurement | g, kg, oz |
| Stabilization Time | 3 seconds |
To Next Page
