Need help?Do you have a question about the OHAUS SD Series and is the answer not in the manual?
Lists components included with the SD Series Bench Scale.
Instructions for placing and leveling the scale base.
How to connect and use the AC adapter for powering the scale.
Instructions for installing optional batteries into the indicator.
How to place the indicator on a table surface.
Mounting indicator directly to a wall.
Attaching mounting brackets for wall or table placement.
Describes the ON/ZERO and UNITS/CAL buttons.
Explains the components of the display.
Describes the scale's power-on self-test.
How to use the zeroing and tare functions.
How the scale displays negative readings.
What happens when the scale is overloaded.
Step-by-step guide to calibrate the scale.
How to lock the calibration function.
Technical specifications for standard base models.
Technical specifications for large base models.
To Next Page
General
