EN-12 SCOUT
TM
SERIES BALANCES - SPX
Hold [Hold]
Set the sub-mode.
OFF = disabled
Peak Hold = allows the user to capture and store the highest stable weight value
(>=5d).
Display Hold = allows the user to capture and store the first stable weight value (>=5d).
When the stable value is being held on the display, the “Hold” icon will blink and the displayed
weight will not change.
Advance to the next menu or return to the top of the current menu.
End Mode [End]
4.5 Unit Menu
This menu activates units so they will be accessible with the Units button. The units in the menu
must be turned “on” to be active.
Note: Available units vary by model and local regulations.
Custom Unit (C)
Use the Custom Unit to display weight in an alternative unit of measure. The custom unit is
defined using a conversion factor based on gram unit, where the conversion factor is the
number of custom units per gram expressed in scientific notation (Factor x 10^Exponent).
Factor
Set the conversion factor (0.1 to 1.99) using the numeric keypad.
The default setting is 1.0.
To Next Page
Loading...
