Why can't I zero my OHAUS T51XW Touch Panel scale?
If you cannot zero your OHAUS Touch Panel scale, or it won't zero when turned on, it could be due to several reasons. First, check if the load on the scale exceeds the allowable limits and remove any excess load. Second, ensure the load on the scale is stable and wait for it to stabilize. If these steps don't work, there may be load cell damage, requiring professional service.
What to do if my OHAUS T51XW Touch Panel unit will not turn on?
If your OHAUS Touch Panel unit doesn't turn on, check the following: * Ensure the power cord is properly plugged into both the unit and the power outlet. * Verify the power outlet is supplying electricity. * If using a T51P model, replace the batteries. * If none of these steps work, service may be required.
Why does my OHAUS Touch Panel show Error 8.3?
Error 8.3 on your OHAUS Touch Panel indicates that the weight reading exceeds the overload limit. Reduce the load on the scale to resolve this issue.
What to do if my OHAUS T51XW Touch Panel shows Error 8.6?
Error 8.6 on your OHAUS Touch Panel means the weight exceeds six digits, causing a display overflow. To fix this, reduce the load on the scale.
What to do if my OHAUS Touch Panel shows Error 8.1?
Error 8.1 on your OHAUS Touch Panel indicates that the weight reading exceeds the Power On Zero limit. Remove the load from the scale and then recalibrate the scale.
Why does my OHAUS T51XW Touch Panel show Error 8.4?
Error 8.4 on your OHAUS Touch Panel means the weight reading is below the Underload limit. To resolve this, add load to the scale and recalibrate it.
Why does my OHAUS Touch Panel show Error 8.2?
Error 8.2 on your OHAUS Touch Panel indicates that the weight reading is below the Power On Zero limit. Add a load to the scale and then recalibrate the scale.
General| Connectivity | USB, RS232, Ethernet |
|---|---|
| Display Type | LCD |
| Power Supply | AC adapter |
| Operating Temperature | 0°C to 40°C |
| Weighing Units | kg, g, lb, oz |
| Calibration | External calibration |
| Housing | Stainless Steel |
| Protection | IP54 |
| Application Modes | Weighing, Counting, Checkweighing |
To Next Page
