What to do if my OHAUS Valor 1000 Scales display Err 8.3?
If your OHAUS Scales show 'Err 8.3', it indicates that the weight on the pan is too heavy. Reduce the sample size until the weight is within the scale's capacity.
What does Err 8.1 mean on my OHAUS Valor 1000 Scales?
If your OHAUS Scales display 'Err 8.1', it could be due to using the wrong weighing pan or the load on the pan exceeding the initial weight setting when powering on the scale. Ensure you are using the original OHAUS weighing pan and remove any load from the pan before turning the scale on.
What does Err 8.2 mean on OHAUS Scales?
If your OHAUS Scales show 'Err 8.2', it means that either the wrong weighing pan is being used or the pan wasn't installed when the scale was powered on. Make sure you are using the original OHAUS weighing pan and that it is properly installed before turning the scale on.
What should I do if my OHAUS Valor 1000 show Err 8.4?
If your OHAUS Scales display 'Err 8.4', it indicates that the weighing pan is not properly installed. To resolve this, ensure that the weighing pan is correctly installed.
What does Err 8.5 mean on my OHAUS Scales?
If the OHAUS Scales display 'Err 8.5', it means the tare value is a negative value. Press the Zero button instead of the Tare button.
Why does my OHAUS Valor 1000 Scales display '--NO--'?
If your OHAUS Scales display '--NO--', it indicates that the value is out of the zero range, which depends on your region. Perform the zero function again according to your regional requirements.
General| Housing | ABS Plastic |
|---|---|
| Platform Size | 190 x 242 mm |
| Display | LCD with backlight |
| Power | AC Adapter or Rechargeable Battery |
| Operating Temperature | -10°C to 40°C |
| Calibration | External calibration |
| Units of Measurement | g, oz |
| Interface | RS232 |
| Readability | 0.5 g - 10 g (depending on model) |
To Next Page
