What to do if Oki B4250 Printer is ready but not printing?
If you try to print and nothing happens, but your Oki Printer indicates it is ready to receive data, there may be a configuration error. Check the cable connection to ensure it is secure. If more than one printer is available, verify that your printer has been selected as the active printer.
How to fix INPUT JAM on Oki Printer?
If your Oki Printer is experiencing an input jam, start by removing the paper tray. Then, remove any crumpled or folded paper you find. Also, check and remove any paper from the underside of the printer. After clearing the obstructions, replace the paper tray. The printer should resume printing automatically once the damaged or misfed paper is removed.
Why is the printing garbled on my Oki B4250 Printer?
If the printing from your Oki Printer is garbled, it indicates that the incorrect driver is installed. Install an appropriate driver to resolve this issue.
Why does my Oki B4250 print garbage?
If you're getting garbage prints from your Oki Printer, the issue might be due to an incorrect cable configuration. Check the cable configuration, continuity, and length to ensure they are correct.
Why is my Oki B4250 Printer printing fuzzy?
If you are experiencing fuzzy print with your Oki Printer, the LED array is likely dirty. Cleaning the LED array should resolve this issue.
Why are bold characters smeared on my Oki B4250 Printer?
If bold characters and dark lines are smeared on your Oki Printer's output, it's likely that the toner is low. Installing a new toner cartridge should resolve this issue.
Why is the printed page light or blurred on my Oki Printer?
If the printed page from your Oki Printer is light or blurred, there could be several reasons. First, check if the toner is low and replace the toner cartridge if needed. Also, ensure you are using paper meant for laser printers and use the recommended paper. A dirty LED array can also cause this issue, so try cleaning the LED array.
Why does my Oki Printer print entire page faintly?
If the entire page prints faintly on your Oki Printer, it's likely due to an empty toner cartridge. As the toner is used up, pages will appear fainter. Install a new toner cartridge to resolve this. Alternatively, the LED array might be dirty; in this case, clean the LED array.
What to do if Oki B4250 is printing blank sheets?
If your Oki Printer is printing blank sheets, it might be due to the image drum cartridge not being properly installed. Try reinstalling the image drum cartridge. Another possible cause is an empty or missing toner cartridge, so install a new toner cartridge if needed.
Why is the print faded on my Oki Printer?
If your Oki Printer is printing faded, it could be due to a few reasons. First, ensure the toner cartridge is correctly installed. If it is, the toner might be low. In that case, replace the toner cartridge.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Monthly Duty Cycle | 50, 000 pages |
| Paper Capacity | 250 sheets |
| Duplex Printing | Yes |
| Connectivity | USB 2.0, Ethernet |
| Maximum Paper Size | Legal |
| Weight | 26.5 lbs (12 kg) |
Explains the purpose of notes for additional information, cautions for equipment damage, and warnings for personal injury.
Describes the operator panel, LEDs, and control button functions for the B4250/B4250n models.
Details the LCD display, buttons, and indicators of the menu-driven operator panel for B4350 models.
Provides instructions and safety precautions for replacing the toner cartridge and cleaning the LED array.
Explains image drum life, replacement procedure, and how to reset the drum counter.
Guides on printing cleaning pages to resolve print quality issues using Status Monitor or control buttons.
Explains how printer status and error messages are displayed and interpreted for different models.
Details procedures for clearing input, feed, and exit paper jams, including safety warnings.
Lists common print quality issues, their causes, and solutions in a symptom-problem-solution format.
Covers troubleshooting for software problems like driver errors and hardware issues like memory or configuration errors.
To Next Page
