99 – C330/C530 Replacing Consumables and Maintenance
Fuser Replacement ______________
The fuser is located inside the printer just behind the toner
cartridges.
1. Press the cover release and open the printer’s top cover fully.
WARNING
If the printer has recently been powered on, some
fuser components will be very hot. Handle the fuser
with extreme care, holding it only by its handle,
which will only be mildly warm to the touch. A
warning label clearly indicates the area. If in doubt,
switch the printer off and wait at least 10 minutes
for the fuser to cool before opening the printer
cover.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
