Network User’s Guide
13
1. Insert the CD into the CD-ROM drive. The Setup Utility
starts automatically. If it does not start, double-click
\setup.exe (in the root directory) on the CD.
2. Select the appropriate language and follow the on-screen
instructions.
3. Accept the Software License Agreement.
4. Select the Optional Utilities tab.
5. Then select Install Admin Manager.
6. Select Oki Device Quick Setup and follow the
on-screen instructions.
7. When the settings are correct, click Execute. The new
settings are transmitted to the network interface but it
still operates with pre-transmission settings.
8. Click Finish to validate the new settings.
6
To Next Page
Loading...
