Network User’s Guide
26
SNMP Tab
This allows you to configure SNMP related items.
NOTE
Not all utilities, features or protocols are
supported by every product. See the front cover
of this manual for a listing of the items
supported by your product.
Item Explanation
Use SNMP
Service
ENABLE or DISABLE the SNMP protocol.
SNMPV1+V3 Select from the drop-down box which (or both)
of these to use.
SNMPV1
Settings
SNMP Read &
Write
Community.
Enables these passwords to be
changed.
SNMPV3
Settings
Enables Authorization and Privacy (Encryption)
setup to be done.
SysContact Set SysContact (printer manager) name.
SysName Set SysName (printer model name).
SysLocation Set SysLocation (the location where the printer
is installed).
Default TTL Set TTL (Time To Live) value.
To Next Page
Loading...
Need help?
General
