Network User’s Guide
87
Verify the printer status using the lpstat command.
# lpstat myprn_lp
The result of lpstat may not be displayed correctly depending
on UNIX operating system specification (e.g. Solaris 2.x).
FTP printing
FTP (File Transfer Protocol) is used for transferring a file with
TCP/IP. If the print data is sent to a logical printer via FTP, it
is printed.
Refer to the workstation’s manual for details of the ftp
command. The following explanation uses print file test.prn
with printer name myprn_lp as an example.
Logical directories
The printer’s network interface includes three logical
directories.
•lp must be used for printing a file created using the printer
driver.
•sjis must be used for printing a text file of Shift JIS Kanji
code.
To Next Page
Loading...
