Network User’s Guide
59
8. Select the appropriate network interface, using the
Ethernet address to identify it, and click Next.
If you are using TCP/IP protocol:
a. When using lpr in UNIX and other TCP/IP environments,
please select Yes. To use in a TCP/IP environment, an IP
address should be assigned to the Ethernet interface.
b. If Yes has been selected and TCP/IP is the only working
protocol and the IP address has not already been assigned,
you can either obtain an IP address automatically or assign
an IP address.
c. When Obtain an IP address automatically is selected, the
device IP address will be automatically assigned by the
DHCP server. In an environment without a DHCP server,
please assign the IP address manually.
d. If you are manually assigning an IP address, you need to
enter:
•An IP address
•Subnet mask
•Gateway address.
e. Click Next.
Using Bonjour protocol
Bonjour is the preferred protocol for printing data from
the Macintosh environment.
Using NetBEUI protocol
Using NetBEUI makes it easy to manage your Oki
product and print within the network environment of
Windows.
NOTE
The Ethernet address of the printer can be found
on the Network Configuration printout (see
“Printing the Network Configuration Report” on
page 9).
To Next Page
Loading...
Need help?
General
