44951501TH Rev.2
5-28
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.5 Manual density adjustment operation
C301/C321/C331/C511/C531 is shipped with "Automatic" set for the auto density adjustment
mode. When "Manual" is set for the mode by a user, the printer may print density out of
adjustment while being used. Perform manual density adjustment operation when the printer
has a density trouble.
Note: The manual density adjustment operation must be performed with the printer
in a static state. Do not perform it while the printer warms up.
(1) Press
or
more than one time. Press the OK button when COLOR MENU
appears.
(2)
or to display ADJUST DENSITY EXECUTE.
(3) Press the OK button.
Auto density adjustment starts.
To Next Page
Loading...
Need help?
General
