44951501TH Rev.2
3-11
Oki Data CONFIDENTIAL
3. INSTALLATION
Turning off the power
Note! Turning off the power without taking proper shutdown steps may damage and
disable the printer. Be sure to follow the steps below.
(1) Press the power switch for about 1 second.
The message of “Shutting down… Please Wait for a while. The power is
automatically turned off.” is displayed on the operator panel, and the LED lamp of
the power switch blinks at intervals of one second. Then, the power of the printer is
automatically turned off, and the LED lamp of the power switch is also turned off.
No use for a long time
When the printer is not used for a long time due to consecutive holidays or when on
vacation, when changing or attaching parts in repaire or maintenance, unplug the AC cord.
Note!
• The printer will not be functionally impaired even if left unplugged for a long time
(more than 4 weeks).
• Even in the power-off status, when the AC cord is connected, electricity is
consumed. (0.5W or less (230V)).
Memo You can turn off the power forcibly by holding down the power switch for more
than 5 seconds. This operation is to shut down the power forcibly; therefore,
data and les in printing cannot be secured. Use the operation only when
trouble occurs.
To Next Page
Loading...
Need help?
General
