44951501TH Rev.2
3-13
Oki Data CONFIDENTIAL
3. INSTALLATION
4. Connect the power cord and the printer cable to the printer and
turn the power ON.
Note! If [SERVICE CALL 182: ERROR] appears, remove the installed optional tray
unit and reinstall it to the printer.
5. Set the number of trays in the printer driver.
Setting should be made in the printer driver to have the printer recognize the optional tray
unit.
If the printer driver hasn’t been set up, set up the printer driver by referring to the relevant
user’s manual (Setup) and then perform the following setup.
Note! Administrator privileges on the computer are required.
For Windows PS printer driver
Note!
This procedure uses C531 driver as an example.
For Windows Vista, select [Start] - [Control Panel] and click [Printers].
For Windows XP, select [Start] - [Control Panel] - [Printers and Other Hardware] -
[Printers and Faxes].
For Windows Server 2003, select [Start] - [Printers and Faxes].
Right-click the [C531 (PS)] icon and select [Properties].
Select [Obtain Printer Information] in [Installable Options] on the [Device Settings]
tab and click [Setup] or [Obtain Printer Information]. For USB connection, manually
set an appropriate value in [Number of Trays].
Click [OK].
For Windows PCL / PCL XPS printer driver
Note!
This procedure uses C531 driver as an example.
For Windows Vista, select [Start] - [Control Panel] and click [Printers].
For Windows XP, select [Start] - [Control Panel] - [Printers and Other Hardware] -
[Printers and Faxes].
For Windows Server 2003, select [Start] - [Printers and Faxes].
Right-click the [C531 (**)] (** is PCL or XPS, which is a type of the printer driver)
icon and select [Properties].
Select [Obtain Printer Information] in the [Device Options] tab. For USB connection,
manually enter the current total number of trays in the [Available Devices].
Click [OK].
For Windows Hiper-C printer driver
Note!
This procedure uses C511 driver as an example.
For Windows Vista, select [Start] - [Control Panel] and click [Printers].
For Windows XP, select [Start] - [Control
Panel] - [Printers and Other Hardware] -
[Printers and Faxes].
For Windows Server 2003, select [Start] - [Printers and Faxes].
Right-click the [C511] icon and select [Properties].
Select [Obtain Printer Information] in the [Device Options] tab. For USB connection,
manually enter the current total number of trays in the [Available Devices].
Click [OK].
For Mac OS X
Note!
• This procedure uses Mac OS X 10.6 as an example.
• This procedure uses C531 driver as an example.
Select [System Preferences] from the Apple menu.
Click [Print & Fax].
Select the name of your machine and then click [Options & Supplies].
Select the [Driver] tab.
Select the total number of trays installed on your machine for [Available Trays], and
then click [OK].
To Next Page
Loading...
Need help?
General
