Oki C531 Maintenance Manual

44951501TH Rev.2
4-30
Oki Data CONFIDENTIAL
4.REPLACEMENT OF PARTS
-1 44453701PA Cover-Assy.-Rear
-2 44453701PA Cover-Assy.-Rear
Stacker-FU_Base
SF-133 Class B
Apply a normal amount of HANAL (SF-133)
to the hatched areas.
Leave it for about 3 minutes (drying time) after painting HANAL SF-133, and then
assemble the Cover-Assy.-Stacker.
Hatched areas
Cover-Rear
SF-133 Class B
Apply a normal amount of HANAL (SF-133)
to the hatched areas.
Hatched areas
44359201PA Frame-Assy.-MPT
Note:1
Note:1
Note:1
Roller-Pitch
Shaft-Idle Dup
Roller-Pitch
Shaft-Idle-Dup
Spring-Torsion-Pitch
EM-30LP Class A
Apply a normal amount of
MOLYKOTE (EM-30LP) to the
hatched areas.
(Side of roller and ditch of shaft)
(The other side is also the same. :
Two places in total)
EM-30LP Class B
Apply a normal amount of MOLYKOTE (EM-30LP) to
the hatched areas. (Center of shaft)

Oki C531 Specifications

General

Print Technology	LED
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Duplex Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Weight	22 kg
Connectivity	USB 2.0, Ethernet
Media Size	A4, A5, A6, B5, Letter, Legal, Envelopes
Resolution	Up to 1200 x 600 dpi
Input Capacity	250 sheets