- 109 -
6. Troubleshooting
The output port of the printer driver is
incorrect.
Select the output port for connecting
the LAN cable or USB cable.
-
The machine is processing data from
another interface.
Wait until printing is complete. -
[Receiving data timeout] or [Invalid
Data] is displayed on the operator
panel and the machine does not
print.
Press the or button on the
operator panel to select [Setting] >
[Admin Setup] > [Print Setup] > [Print
Menu] > [Printer Adjust] > [Timeout
Injob] and set a longer period of time.
The factory default setting is
40 seconds.
If the job is not printed with "Received
invalid data" displayed, the selected
emulation language may not match
this machine (model). Make sure that
the printer driver you use supports
this model of the machine.
-
Cause Solution Reference
To Next Page
Loading...
