- 91 -
5. Maintenance
Cleaning Each Part of the Machine
This section describes how to clean the machine and parts.
• Cleaning the Surface of the Machine (Advanced Manual)
• Cleaning the Paper Feed Rollers (Tray 1/Tray 2/Tray 3) (Advanced Manual)
• Cleaning the Paper Feed Rollers (MP Tray) (Advanced Manual)
• Cleaning the LED Head
Clean the LED head if vertical white lines appear, images are faded, or the periphery of
letters are smudged in the printouts.
• Do not use solvents, such as methyl alcohol or thinners, because they may damage the LED head.
• Do not expose the image drum to direct sunlight or strong light (approximately 1,500 lux or more). Even under room
lighting, do not leave the image drum for 5 minutes or more.
1
Press the button (A) and open the output tray (a) completely.
Cleaning the LED Head
Burns may result.
The fuser unit is extremely hot. Do not touch it.
To Next Page
Loading...
