Menu functions > 21
M
ENU
FUNCTIONS
This section lists the menus accessed via the controls on the printer’s operator panel and
displayed in the LCD window.
O
PERATOR
PANEL
:
1. Ready LED ON: Ready to receive data.
BLINKING: Processing data.
OFF: Offline.
2. Display Displays the printer status and
any error messages.
3. Menu Scroll
Buttons
Enters the Menu mode. In
Menu mode, forwards or
reverses the menu item
displayed.
Press for 2 secs. or longer to
jump from top to bottom.
4. On Line Button Switches between ONLINE
and OFFLINE.
Exits the menu and goes
ONLINE when pressed in the
Menu mode.
Scrolls the HELP screen.
Forces printing on the paper
currently loaded when pressed
with “WRONG PAPER” or
“WRONG PAPER SIZE”
displayed.
5. Attention LED ON: A warning occurs.
Printing may be possible (e.g
low toner).
BLINKING: An error occurs.
Printing not possible (e.g.
toner empty).
OFF: Normal condition.
6. Back Button Returns to the previous higher
level menu item.
Pressing this button for more
than 4 seconds initiates the
printer shutdown procedure,
select Yes to continue or No
to abort.
7. Enter Button In the ONLINE or OFFLINE
mode: enters the Menu
mode.
In the Menu mode:
determines the setting
selected.
8. Cancel Button Deletes the data being printed
or received when pressed for
two seconds or longer.
Deletes the data when
pressed for two seconds or
longer with WRONG PAPER
SIZE, RUN OUT OF PAPER,
TRAY 1 IS OPEN, or TRAY 1 IS
NOT FOUND is displayed.
Exits the menu and goes
ONLINE when pressed in the
Menu mode.
9. Help Button Provides advice when an
error such as incorrect paper
size occurs.
10. Power Save/
Wake Up Button
Pressing this button switches
the machine into sleep or
wake-up mode. Refer to
“Power saving mode” on
page 13.
2
1
3
4
8
7
6
5
9
10
To Next Page
Loading...
Need help?
General
