Maintenance > 57
C
LEANING
THE
LED
HEAD
Clean the LED heads when printing does not come out clearly, has white lines or when text
is blurred.
There is no need to switch off the printer to clean the lens.
1. Press the cover release and open the printer’s top cover fully.
2. Gently wipe the LED head surface with a clean, lint free cloth.
3. Close the top cover and press down firmly at both sides so that the cover latches
closed.
CAUTION!
Do not use methyl alcohol or other solvents on the LED head as
damage to the lens surface will occur.
To Next Page
Loading...
