Oki C710dn Setup Guide

C710 Setup Guide
5
Insert Power Cable
Insert the power cable (a) and turn the
printer ON (b).
WARNING!
Be sure to use the 15A AC power cord
supplied with the printer. Use of a power
cord NOT supplied with this printer, or an
extension cord, may result in overheating,
and could be a safety hazard.
CAUTION!
To prevent fire or shock hazards, connect
the power plug only to a properly rated
power outlet.
CAUTION!
Do not connect this product to an
uninterruptible power supply (UPS). For
further information please contact Oki Data
at 1-800-OKIDATA or www.okidata.com.
Print a Demo Page
1 Press Menu on the control panel.
2 Press the down arrow to select Print
Information.
3 Press Enter.
4 Press the down arrow to select Demo
Page.
5 Press Enter.
6 Demo1 appears. Press Enter.
7 Execute appears. Press Enter.
Computer Connection
Install Network Cable
Connect the network cable between the
printer network port (a) and the Ethernet
hub or router.
Install Parallel Cable
Connect the IEEE 1284 parallel cable
between the printer parallel port (a) and
the host computer.
USB Connection
Note: Install the printer software BEFORE
installing the USB cable. See
“Windows - USB Setup” on page 7.
a
OI
b
a
a
a

Oki C710dn Specifications

General

Brand	Oki
Model	C710dn
Category	Printer
Language	English