Menu functions > 48
System Adjust Power Save Time
Default: 30
Select from 1/2/3/4/5/10/15/30/60/120
Minutes.
Select by scroll and Enter button.
Sleep Time
Default: 10
Select from 1/2/3/4/5/10/15/30/60/120
Minutes.
Select by scroll and Enter button.
Clearable Warning
Default: ONLINE
Select from: ONLINE/Job. Select by scroll and
Enter button. PS job only.
Auto Continue
Default: Off
Select from On/Off. Select by scroll and Enter
button.
Manual Timeout
Default: 60
Select from Off/30 seconds/60 seconds.
Select by scroll and Enter button.
Wait Timeout
Default: 40
Select from Off/5/10/20/30/40/50/60/
90/120/150/180/210/240/270/300
seconds. Select by scroll and Enter button.
Low Toner
Default: Continue
Select action to take when toner sensor
indicates low toner. Select from Continue/
Stop. Select by scroll and Enter button.
Jam Rcovery
Default: On
Select from On/Off. Select by scroll and Enter
button.
Error Report
Default: Off
Select from On/Off. Select by scroll and Enter
button.
Print Position Adjust
Default: 0.00
Select from X Adjust/Y Adjust. Select by
scroll and Enter button. Define measurement.
Paper Color Setting
-2/-1/0/+1/+2
Default: 0
Used for fine adjustment of the colour print on
paper.
Films Color Setting
-2/-1/0/+1/+2
Default: 0
Used for fine adjustment of the colour print on
films.
SMR Setting
+3/+2/+1/0/-1/-2/-3/
Default: 0
To correct variations in print results caused by
temperature/humidity conditions and difference
in print density/frequency.
Change the setting when print quality is
uneven.
BG Setting
+3/+2/+1/0/-1/-2/-3/
Default: 0
To correct variations in print results caused by
temperature/humility conditions and difference
in print density/frequency.
Change the setting when background is dark.
Drum Cleaning
Default: Off
Sets whether to rotate the drum in idle prior to
printing in order to reduce horizontal white
lines.
Be warned that this will shorten the ID life by as
much as this rotation. Select by scroll and
Enter button.
Hex Dump Execute Prints out data received from the host PC in the
hexadecimal Dump. Turning off the power
supply switch restores Normal Mode.
ITEM ACTION EXPLANATION